Raise3D Industrial PETG ESD Filament Black 1kg (1.75mm)
Raise3D PETG ESD Filament
Raise3D’s Industrial PETG ESD filament is an electrostatic discharge-safe printing material based on carbon nanotube-filled PETG. Thanks to its excellent printability, chemical resistance and electrostatic dissipative properties, PETG ESD is ideal for applications in automotive, aerospace, general manufacturing and electronic industry. Industrial PETG ESD filament is ideal for uses such as housings, casings, jigs and fixtures where electrostatic discharge (ESD) protection is required.
- Consistent and reliable surface resistance
- Surface finish
- Excellent chemical resistance
- Good impact resistance
Compatibility: Premium PVA+
Applications
- Automotive
- Aerospace
- Semi-conductor industry
- Housing and casing for electrical appliances
- Industrial equipment
Material Performance
Printing Guide
Recommended Print Settings

Nozzle temperature (°C)
260-280℃

Bed temperature (°C)
70-80℃

Layer height (mm)
0.1-0.25 mm

Printing speed (mm/s)
20-80 mm/s

Cooling fan
Off

Drying temperature (°C)
60℃ for 6-12 hours
Printing Notifications:
- Due to dispersed CNTs (Carbon Nano Tubes) in PETG ESD, we recomend to print model with higher infill density and minimal wall thickness of 1.5 mm for a better interlayer bonding quality and ESD property.
- For a better bed adhesion, brim or raft are recommended and set bed temperature at 80 °C.
Title | Raise3D Industrial PETG ESD Filament Black 1kg (1.75mm) |
---|---|
Manufacturer | Raise3D |
Base Material | PETG |
Difficulty | Easy / Intermediate |
Nozzle Temperature | 260℃ - 280℃ |
Heated Bed Required? | Yes |
Print Bed Temperature | 70°C - 80°C |
Bed Adhesion | For better bed adhesion, brim or raft are recommended and set bed temperature at 80 °C |
Enclosure Required? | No |
Nozzle Size | ≥ 0.4mm |
Print Speed | 20 - 80 mm/s |
Fan Speed | Off |
Spool Weight | 1 KG |
Drying | 60°C for 6 to 12 hours |
Minimum Nozzle Temp | 260ºC |
Dimensional Accuracy | < +/- 0.05mm |
Other Recommendations | Due to dispersed CNTs (Carbon Nano Tubes) in PETG ESD, we recomend to print model with higher infill density and minimal wall thickness of 1.5 mm for a better interlayer bonding quality and ESD property. |
MPN | [S]5.11.19014A01 |
Diameter | 1.75mm |
Write Your Own Review