3D Printlife E PVA Enhanced PVA Cold Water Soluble Support 3D Printer Filament

In stock
$32.99 Regular Price $39.99
Enhanced PVA Water Soluble Support 3D Printer Filament

E PVA is an enhanced cold water soluble support 3D printer filament. E PVA has much more thermally stability than standard PVA’s and it also bonds well to PLA, ABS, and PETG.



  • Enhanced PVA formulation with improved stability for 3D printing
  • Bonds well with PLA's, ABS, PETG, & Nylon
  • Excellent water solubility, even in cold water
  • Much greater thermal stability than standard PVA
  • Perfect support for prints with large overhangs or complex internal geometries
  • Non toxic and biodegradable once dissolved in water





Non toxic and biodegradable once dissolved in water, E PVA is an excellent support for prints with large overhangs or complex internal geometries. The speed that E PVA dissolves in water depends on the overall geometry of the printed object, the volume, and temperature of the water.


Warmer water accelerates dissolution but do not exceed 95℉ (35˚C) for PLA as parts may be damaged. For higher temperature materials like ABS or PETG, printed parts are safe in water up to 158℉ (70˚C).


Submerging parts in warm water for 10 - 15 minutes should allow for quick removal of much of the support material, either with tools or by hand, easily before re-submerging in water for the remainder of the process. This should speed up the dissolution process and a final rinse in the sink will help remove any excess support. Do not exceed printing temperature of 225˚C for a prolonged period, recommended bed temperature is >60˚C.


Made in the USA with 100% virgin resins and precision manufacturing combined to deliver the ultimate in consistent 3d printing for hobbyists to Industry 4.0.




3D Printlife is committed to improving sustainability in 3D printing and aiding in the fight against climate change. Our 3D filaments are compatible with your 3D Printer or 3D Pen, and we stock both 1.75mm & 2.85mm diameters.  Featuring materials from FormFutura, Filamentive, Copper3D, FibreTuff, & Keene Village Plastics, our 3D filaments are biodegradable, eco-friendly, tough materials that are modified and optimized for 3d printing,and feature cardboard spooling to help offset your carbon footprint. We offer Pro PLA, PLAyPHAb PLA/PHA, PVA, Enviro ABS, Bio PETG, ALGA algae based PLA, Nylon like DURA, ABS like OMNI, semi flexible YOGA TPU replacement, RePLAy 100% recycled PLA filament, Carbon Fibre, ASA, Polypropylene, PEEK, Carbon Fiber PEEK, PEKK, PEI Ultem, and PPSU. Use your 3D Scanner or your imagination to help create your 3D printed parts. Our sustainable 3D filaments are compatible with FDM 3D Printers including Dremel, Raise3D, Flashforge, Creality, XYZPrinting, QIDI, Syndaver, Robo3D, Prusa, Snapmaker, Monoprice, Lulzbot, MakerBot, and Ultimaker.

More Information
Title 3D Printlife E PVA Enhanced PVA Cold Water Soluble Support 3D Printer Filament
Manufacturer 3D Printlife
Base Material PVA
Difficulty Advanced
Nozzle Temperature 195℃ - 225℃
Heated Bed Required? No
Print Bed Temperature 0°C - 60°C (if available)
Bed Adhesion Glass Plate, Tape, Buildtak, PEI
Enclosure Required? No
Nozzle Size ≥ 0.15mm
Print Speed Medium
Fan Speed 30%
Flow Rate 104%
Retraction ± 5mm
Spool Weight 500g
Drying Recommended
Minimum Nozzle Temp 195℃
Dimensional Accuracy < +/- 0.05mm
Other Recommendations Do not exceed print temp of 225˚C or E PVA will crystallize and will no longer flow or dissolve in water. Storage: Cool and dry (15-25˚C), away from UV light. This enhances the shelf life significantly. We recommend the relative humidity stay below 50%.
Settings Note: The settings above are meant as a guide to find your optimal print settings. They should work well for most printers, but every printer is different. Please feel free to experiment outside these ranges if you think it is suitable for your printer.
Write Your Own Review
You're reviewing:3D Printlife E PVA Enhanced PVA Cold Water Soluble Support 3D Printer Filament
Your Rating