Filamentive PLA Matte 3D Printer Filament
Filamentive PLA Matte: 70% Recycled 3D Printer Filament. As the name suggests, this is the perfect filament for those desiring a matte finish. The printed surface diffuses light to give it a matte look and reduce visibility of layer lines. Not to mention the added texture finish! Made for the hobbyist to Industry 4.0.
- High quality PLA 3D Printer filament
- 70% Recycled content (average of all colors of this material; can vary)
- 100% recyclable cardboard spool and packaging
- Matte finish
- Hides layer lines
- Hardened/steel nozzle recommended as PLA Matte filament can be more abrasive than normal PLA
There is a clear environmental need for recycled filament, and UK based Filamentive is one of the world's leading recycled 3D filament producers. 3D Printlife is proud to introduce Filamentive’s line of sustainable 3d filament to the US. Filamentive’s commitment to sustainability and quality in 3d printing is exemplary and we have admired them since their inception. NO loss of mechanical properties, ±0.05mm diameter tolerances, Filamentive uses 100% recyclable cardboard spools as well as recyclable cardboard packaging. Compatible with your 3D Printer or 3D Pen, 3D Printlife stocks both 1.75mm & 2.85mm diameters in popular 3D filaments like rPLA, PLA Matte, rPETG, rASA, and Carbon Fibre rPETG. Use your 3D Scanner or your imagination to create your 3D printed parts. For beginners, experts, educators, hobbyists, home, or industry 4.0. Compatible with FDM 3D Printers including Dremel, Raise3D, Flashforge, Creality, XYZPrinting, QIDI, Syndaver, Robo3D, Prusa, Snapmaker, Monoprice, Lulzbot, MakerBot, and Ultimaker.
Title | Filamentive PLA Matte 3D Printer Filament |
---|---|
Manufacturer | Filamentive |
Base Material | PLA |
Difficulty | Easy |
Nozzle Temperature | 195℃ - 215℃ |
Heated Bed Required? | No |
Print Bed Temperature | 50°C - 60°C |
Bed Adhesion | Glass Plate, Tape, Buildtak, PEI |
Enclosure Required? | No |
Nozzle Size | ≥ 0.4mm |
Print Speed | Medium - High |
Fan Speed | Medium - High |
Flow Rate | 105% |
Retraction | ± 5mm |
Spool Weight | 750g |
Drying | No |
Minimum Nozzle Temp | 195ºC |
CA Prop 65 | Y |
Dimensional Accuracy | < +/- 0.05mm |
Other Recommendations | A hardened/steel nozzle is recommended |
Settings Note: | The settings above are meant as a guide to find your optimal print settings. They should work well for most printers, but every printer is different. Please feel free to experiment outside these ranges if you think it is suitable for your printer. |
Recycled | ✓ |