Raise3D PC (polycarbonate) 3D Filament 1.75mm
Raise3D PC
Reliable and durable filament for engineering and end-use
PC (Polycarbonate) is a strong thermoplastic 3D printing filament that characterized by its excellent impact resistance, high stiffness, heat resistance, and flame retardant properties. As a result, PC filament can absorb impact, prevent deformation or cracks, and maintain stability under high temperatures and flames. Due to its 110°C heat resistance, PC performs well in high-temperature environments, such as under the hood of a car. Also known for its impact strength, PC is commonly used for producing rigid parts, function testing, finished parts assembly, and manufacturing.
- Excellent impact resistance
- High stiffness and strength
- High heat resistance
- High toughness
- Flame retardant
- Optical translucency
Applications:
- Electronic cases
- Tooling and fixtures
- Industrial modeling
- End-use parts
Material Performance
Printing Guide
Recommended Print Settings

Nozzle temperature (°C)
250-270℃

Bed temperature (°C)
90-110℃

Layer height (mm)
0.1-0.25 mm

Printing speed (mm/s)
25-90 mm/s

Cooling fan
Low or off

Drying temperature (°C)
80℃
Printing Notifications:
- For a better bed adhesion, brim or raft are recommended and set bed temperature at 110 °C and turn off cooling fan during the printing.
- Dry PC filament before printing.
Title | Raise3D PC (polycarbonate) 3D Filament 1.75mm |
---|---|
Manufacturer | Raise3D |
Base Material | PC (polycarbonate) |
Difficulty | Intermediate |
Nozzle Temperature | 250℃ - 270℃ |
Heated Bed Required? | Yes |
Print Bed Temperature | 90°C - 110°C |
Bed Adhesion | Glass Plate, Tape, Buildtak, PEI |
Enclosure Required? | Recommended |
Nozzle Size | ≥ 0.15mm |
Print Speed | 25 - 90 mm/s |
Fan Speed | Low - None |
Retraction | ± 5mm |
Spool Weight | 1 Kg |
Drying | 80°C |
Minimum Nozzle Temp | 250ºC |
Dimensional Accuracy | < +/- 0.05mm |
Other Recommendations | For better bed adhesion, brim or raft are recommended and set bed temperature at 110 °C and turn off cooling fan during the printing. |
Diameter | 1.75mm |