Raise3D Industrial PA12 CF Support Filament Pink 1kg (1.75mm)
Raise3D PA12 CF Support
A special break-away support material designed for PA12 CF composite filaments.
Raise3D Industrial PA12 CF Support Filament is a break-away support material specially developed for FFF printing process with carbon fiber reinforced PA filaments. This support material has broad compatibility with many high-performance carbon fiber reinforced composite filaments and is more cost-effective when compared with water-soluble support material.
- Cost effective
- Easy and fast removal with tools or hands
- No special treatments required
- Broad compatibility
Compatibility: PA12 CF and other PA CF filaments
Applications
- Support material for PA12 CF
- For large overhangs and cavities
- Easy to remove and break-away
- Smooth and clean support interface
Material Performance:
Printing Guide
Recommended Print Settings
Nozzle temperature (°C)
280℃-290℃
Bed temperature (°C)
60-80℃
Layer height (mm)
0.1-0.25 mm
Printing speed (mm/s)
30-120 mm/s
Cooling fan
30%-50%
Drying temperature (°C)
80℃ for 6-8h
Printing Notifications:
- It is recommended to use hardening steel nozzle, tungsten steel or ruby nozzle to avoid nozzle abrasion.
- PA12 CF Support is sensitive to moisture and should always be stored and used under dry conditions (relative humidity below 20%).
- Dry PA12 CF Support in the oven at 80°C for 6-8 hours before printing.
Title | Raise3D Industrial PA12 CF Support Filament Pink 1kg (1.75mm) |
---|---|
Manufacturer | Raise3D |
Base Material | Break-Away |
Difficulty | Easy / Intermediate |
Nozzle Temperature | 280℃ - 290℃ |
Heated Bed Required? | Yes |
Print Bed Temperature | 60°C - 80°C |
Enclosure Required? | Recommended |
Nozzle Size | ≥ 0.15mm |
Print Speed | 30 - 120 mm/s |
Fan Speed | 30 - 50% |
Spool Weight | 1 KG |
Drying | 80°C for 6 to 8 hours |
Minimum Nozzle Temp | 280ºC |
Dimensional Accuracy | < +/- 0.05mm |
Other Recommendations | PA12 CF Support is sensitive to moisture and should always be stored and used under dry conditions (relative humidity below 20%) |
MPN | [S]5.11.01077A01 |
Diameter | 1.75mm |
Write Your Own Review