LulzBot Taz Pro Industrial 3D Printer

81I5jhAhK0L._SL1500_.jpg
unnamed-2.jpg
TAZ_Pro_LCD_Angle_2000x1500.jpg
unnamed-2.png
unnamed.png
PrintArea_Dim.png
OperatingFootprint_Dim.png
81I5jhAhK0L._SL1500_.jpg
unnamed-2.jpg
TAZ_Pro_LCD_Angle_2000x1500.jpg
unnamed-2.png
unnamed.png
PrintArea_Dim.png
OperatingFootprint_Dim.png

LulzBot Taz Pro Industrial 3D Printer

4,950.00

With Free Shipping!

Includes 4 FREE Spools of our Premium 3D Filaments!

Free spools include 3D Printlife's Pro PLA, PLAyPHAb High Strength PLA/PHA, Enviro Eco-Friendly ABS, and BioPETG Eco-Friendly PETG, all made here in the USA at our medical grade extrusion facility.

TAZ Pro Enables Multi-Material Printing for Optimal Part Characteristics

The TAZ Pro's multiple material capabilities goes beyond competitive offerings which are usually limited to printing with the same material type in different colors, or the second material being only for soluble support. The TAZ Pro features independent vertical lifting E3D hot ends with 360-degree part cooling, delivering clean transitions between material types with similar melting points. Durable and high-strength composite materials can be printed within the same part, as well as a wide range of materials with soluble supports for complex prints. Flexible materials with a Shore A hardness as low as 85A and industrial-grade polymers can also be printed in the same print.

The hardened-steel components of the TAZ Pro enable printing with engineered polymers or high-heat composites that are too abrasive for typical out-of-the-box desktop 3D printers. LulzBot 3D printers support the industry’s widest array of thermoplastics from leading premium filament manufacturers including flexible, rigid, composite, soluble, conductive, high strength, and chemically-resistant materials.

Quantity:
Add To Cart

The LulzBot TAZ Pro delivers true multi-material printing, soluble supports, superior 3D print quality, and easy, professional results.

  • Two active-lifting hot ends enable true multi-material 3D printing and complex parts.

  • Large 280 x 280 x 285 mm build volume with heated build plate.

  • Automated X/Y/Z offset calibration, nozzle wiping, and self-leveling features.

  • Hardened steel E3D components enable printing of soft, flexible materials up to industrial-grade composites.

  • Dual filament runout sensors.

TAZ Pro Provides Superior Print Quality and Industrial-Grade Components

The new Z-axis belt drive delivers fast cycle times for quicker throughput. The reduction of Z wobble through the belt drive and new X/Y/Z backlash compensation improves 3D printed part quality and  accuracy. An increased size of 280 x 280 x 285 mm (11.02” x 11.02” x 11.22”) delivers a large print volume, while the dual filament run-out sensors alarm when a new filament reel is needed.

TAZ Pro Makes it Easy to Get Professional Results

Enhanced electronics provide for greater processing power and memory for complex parts, added functionality with improved visibility from a new 5” full color touch screen, and quiet operation while sitting right on your desk. TAZ Pro’s automated X/Y/Z offset calibration, nozzle wiping, and self-leveling features ensure exceptional, expedited results. Cura LulzBot Edition Software continues to include pre-configured print profiles, tested by Aleph Objects’ team of experts, for over 35 filament types.

Multi-Material & Complex Parts

Multi-Material
The TAZ Pro boasts true multi-material 3D printing with unique filaments, not just different colors. Two active-lifting hot ends enable printing with multiple materials with similar melting points within the same part.

Soluble Supports
Enjoy total geometric freedom straight out of the box! The TAZ Pro supports water-soluble dedicated support material for complex designs, eliminating the need for time-consuming manual post-processing.

Hardened Steel Components
The hardened-steel components of the TAZ Pro enable printing with high-strength and high-heat composites that are too abrasive for typical out-of-the-box desktop 3D printers.

Flexible-Ready
Go from printing PLA to 85A shore hardness TPU and back again without changing tool heads. The genuine E3D Titan Aero extruder/hot ends print both rigid and flexible materials with ease.

Superior Print Quality

Premium Hot Ends
Two genuine E3D Titan Aero hot ends and 360° part cooling deliver premium prints while improved heat sink cooling prevents filament stripping during printing.

Belt Driven Z-Axis
A belt drive Z-axis, technology exclusively found on LulzBot 3D Printers, eliminates "Z wobble" print artifacts often caused by threaded rods while simultaneously speeding up cycle times.

Professional Material Profiles
Tweak designs, not material profiles. Our dedicated in-house technicians spend hundreds of hours verifying material quality and perfectly crafting ready-to-print profiles. All that's left for you to do is click print.

Automatic Backlash Compensation
A concept used in professional-grade CNC's, the LulzBot TAZ Pro uses an innovative calibration cube to measure and compensate for X/Y/Z backlash, increasing printed part precision.

Easy, Professional Results

Automatic Calibration
Automatic nozzle wiping, a self-leveling bed, and an all new calibration cube eliminate the need for time consuming calibration prints and manual bed leveling.

Enhanced Electronics
Enhanced electronics deliver greater processing power, more memory, quiet operation, and additional functionality.

Ready-To-Print Profiles
Enjoy the industry’s widest array of supported materials with ready-to-print profiles including flexible, rigid, composite, conductive, high strength, and chemically-resistant filaments. Simply select your material and desired print quality, then press print.

5" Full Color Touch Screen
Added functionality with improved visibility is at your fingertips with an easy-to-use, full-color capacitive touch screen.

Key Technical Specifications

  • Tool Head: TAZ Pro Dual Extruder, 2x E3D 0.50mm nozzle

  • Layer Resolution: 0.05 mm - 0.4 mm (0.002 in - 0.02 in)

  • Max Hot End Temperature: 290°C

  • Print Surface: Borosilicate Glass/PEI

  • Max Print Surface Temperature: 120°C

  • Leveling: Automatic Z-Axis Compensation

  • Calibration: Automatic X/Y/Z Offset Calibration

  • Certifications: FCC, CE, WEEE, ETL by Intertek (UL), CA, CSA, OSHWA