FormFutura PPSU 3D Printer Filament 500g
Key features
-
Solvay PPSU inside
-
Excellent thermal propterties with a glass transition temperature of 220°C.
-
Flame retardant (UL 94 V-0) with low smoke evolution and low smoke toxicity
-
Superior hydrolytic resistance
-
Qualified for repeated steam sterilization (>1000 cycles)
-
-
High Environmental Stress Crack Resistance (ESCR)
-
Very high impact strength and high stiffness over a wide temperature range
-
Very good resistance against high energy radiation (gamma- and X-rays)
-
Good electrical insulating and dielectric properties
Applications
-
Industrial applications
-
Electronics
-
Medical parts
-
Aerospace applications
-
Automotive
FormFutura is one of the leading suppliers of additive manufacturing materials in the world. Founded in The Netherlands, in 2012, they quickly grew into an unmistakable brand with resellers and customers across Europe. FormFutura has made a pro-active effort to promote sustainable packaging in the 3D Printing industry, from environmentally friendly recycled products to supporting green initiatives. Compatible with your 3D Printer or 3D Pen, 3D Printlife stocks both 1.75mm & 2.85mm diameters in popular 3D filaments like ApolloX ASA, Centaur PP (Polypropylene), TitanX ABS, Galaxy PLA, Silk Gloss PLA, and HDglass PETG, to engineering materials like PEEK, Carbon Fiber PEEK, PEKK, PEI Ultem, and PPSU. Use your 3D Scanner or your imagination to create your 3D printed parts. For beginners, experts, educators, hobbyists, home, or industry 4.0. Compatible with FDM 3D Printers such as Dremel, Raise3D, Flashforge, Creality, XYZPrinting, QIDI, Syndaver, Robo3D, Prusa, Snapmaker, Monoprice, Lulzbot, MakerBot, and Ultimaker.
Title | FormFutura PPSU 3D Printer Filament 500g |
---|---|
Manufacturer | FormFutura |
Base Material | PPSU |
Difficulty | Advanced |
Nozzle Temperature | 360°C - 400°C |
Heated Bed Required? | Yes |
Print Bed Temperature | ≥120ºC |
Bed Adhesion | EasyFix Nr. VII |
Enclosure Required? | 90°C heated chamber |
Nozzle Size | ≥ 0.4mm |
Fan Speed | 0 - 25% |
Spool Weight | 500g |
Drying | +4 hours at max.110°C |
Minimum Nozzle Temp | 360°C |
Settings Note: | The settings above are meant as a guide to find your optimal print settings. They should work well for most printers, but every printer is different. Please feel free to experiment outside these ranges if you think it is suitable for your printer. |