3D Printlife 3D-Solve Advanved Water Soluble Support 3D Printer Filament

In stock
SKU
3DSOLVE-P
$79.99
 
Advanved Water Soluble Support 3D Printer Filament

3D-Solve is a water soluble material that allows you to print complex geometries with the ability to rinse away supports. Best of all 3D-Solve dissolves in water by 99% in 20 just minutes!

 

  • Dissolves in water by 99% in 20 just minutes
  • Print complex geometries
  • Adheres to higher temperature FDM materials like ABS, Nylon, PETG, PLAyPHAb, and many other materials
  • Safe to rinse down the drain
  • Non Toxic
  • NOT compatible with PLA

 

In a single print build, 3D-Solve allows you to print gravity-defying overhangs or built-in movement and articulation. 3D suspension and previously-impossible complex designs are easily achieved. All it takes is a rinse under the tap or a soak in a bowl of water to loosen and dissolve the supports. There is nothing to break away and no leftover "support stubble", no matter how deep or out-of-reach the area. Made for the hobbyist to Industry 4.0.

 

 

 

 

3D Printlife is committed to improving sustainability in 3D printing, our 3D filaments are compatible with your 3D Printer or 3D Pen, and we stock both 1.75mm & 2.85mm.  Featuring materials from FormFutura, Filamentive, Copper3D, FibreTuff, & Keene Village Plastics, our 3D filaments are biodegradable, eco-friendly, tough materials and feature cardboard spooling to help offset your carbon footprint, and are modified and optimized for 3d printing including PLA, PLAyPHAb PLA/PHA, PVA, Enviro ABS, Bio PETG, ALGA algae based PLA, Nylon like DURA, ABS like OMNI, semi flexible YOGA TPU replacement, RePLAy 100% recycled PLA filament, Carbon Fibre, ASA, Polypropylene, PEEK, Carbon Fiber PEEK, PEKK, PEI Ultem, and PPSU. Use your 3D Scanner or your imagination to help create your 3D printed parts. Our sustainable 3D filaments are compatible with FDM 3D Printers including Dremel, Raise3D, Flashforge, Creality, XYZPrinting, QIDI, Syndaver, Robo3D, Prusa, Snapmaker, Monoprice, Lulzbot, MakerBot, and Ultimaker.

More Information
Title 3D Printlife 3D-Solve Advanved Water Soluble Support 3D Printer Filament
Manufacturer 3D Printlife
Base Material WATER SOLUBLE
Difficulty Advanced
Nozzle Temperature 205℃ - 235℃
Heated Bed Required? No
Print Bed Temperature 0°C - 60°C (if available)
Bed Adhesion Glass Plate, Tape, Buildtak, PEI
Enclosure Required? No
Nozzle Size ≥ 0.15mm
Print Speed < 35 mm/s
Fan Speed 75-100%
Flow Rate 95-105%
Retraction ± 5mm
Spool Weight 500g
Drying Recommended
Minimum Nozzle Temp 205℃
Dimensional Accuracy < +/- 0.05mm
Other Recommendations Do not exceed a printing temperature of 235˚C. Store in a resealable bag with desiccant between 0°C and 30 C, and we recommend the relative humidity stay below 50%. Avoid direct sunlight.
Settings Note: The settings above are meant as a guide to find your optimal print settings. They should work well for most printers, but every printer is different. Please feel free to experiment outside these ranges if you think it is suitable for your printer.
Write Your Own Review
You're reviewing:3D Printlife 3D-Solve Advanved Water Soluble Support 3D Printer Filament
Your Rating