da Vinci Jr. 1.0 Pro
da Vinci Jr. 1.0 Pro
Print with any 3rd Party Filament
The da Vinci Jr. 1.0 Pro has adjustable temperature settings for the extruder nozzle, making it compatible with 3rd party 1.75mm PLA filaments.
With it's auto-loading filament system, the da Vinci Jr. 1.0 Pro ensures that all filament is fed properly.
The da Vinci Jr. 1.0 Pro uses an intuitive 9-point calibration detection system that accurately determines the distance between the extruder and the print bed.
The new XYZware Pro has increased maximum printing speed of 100mm/sec., decreasing the time you have to wait for your prints to be finished. With adjustable software settings, you can change the nozzle and print bed temperature, speed, print support and retraction settings.
XYZware Pro is compatible with third party g-codes(Cura and Slic3r)
0.3mm Nozzle Upgrade Optional Add-on
A 0.3mm diameter extruder is available as a separate purchase add-on for the da Vinci Jr. series and it is perfect for intricate print jobs. The 0.3mm diameter extruder can provide a smoother print surface at a spectacular 50 micron resolution.
New Wind Duct Extruder Design for Better Prints
The da Vinci Jr. 1.0 Pro features a new wind duct design which enhances the cooling effect to provide a smoother printing performance.
FFF (Fused Filament Fabrication)
Product Dimension (WxDxH)
16.54 x 16.93 x 14.96 inch (42 x 43 x 38 cm )
21.53 x 22.87 x 18.7 inch (54.7 x 58.1 x 47.5 cm)
33.07 lbs (15kg)
Maximum Build Volume (WxDxH)
5.9 x 5.9 x 5.9 inch (15x15x15cm)
Fast 0.1 mm (100 microns)
Standard 0.2 mm (200 microns)
Speed 0.3 mm (300 microns)
Ultra Fast 0.4 mm (400 microns)
Maximum Printing Speed
up to 100mm/s*
* Note: maximum printing speed tested by actual material
extrusion speed under laboratory testing conditions, actual
printing results may vary.
0.4 mm /0.3 mm (Optional)
2.6” FSTN LCM
USB 2.0, SD card
*Systems are compatible with SDHC cards up to 32GB in size.
Printing Temperature Range
190°C ~ 230°C (374°F ~ 446°F)
.stl, XYZ Format (.3w, .nkg), Windows (.3mf ). gcode
Windows 7 and above (for PC)
Mac OSX 10.9 and above (for Mac)
Note: Stardard VGA driver on operating system, or a graphics card doesn't support OpenGL 2.1, may cause unknown error in XYZware.
Hardware Requirements (for PC/Mac)
X86 32/64-bit compatible PCs with 4GB+ DRAM (for PC)
X86 64-bit compatible Macs with 4GB+ DRAM (for Mac)