ALGA™ Algae Based PLA

ALGA_Tan_Green-Spools-375g-1024x683.png
ALGA_Blue_Green-Spools-375g-1024x683-2.png
ALGA_Red_Green-Spools-375g-1024x683.png
ALGA_Gray_Green-Spools-375g-1024x683.png
ALGA_Diatomic_Green-Spools-375g-1024x683.png
ALGA_Green_Green-Spools-375g-1024x683-3.png
ALGA_Black_Green-Spools-375g-1024x683.png
ALGA_Tan_Green-Spools-375g-1024x683.png
ALGA-Coils-600x600.png
ALGA-Spools-600x600-2.png
ALGIX 3D_ ALGA™2.jpg
ALGA_Tan_Green-Spools-375g-1024x683.png
ALGA_Blue_Green-Spools-375g-1024x683-2.png
ALGA_Red_Green-Spools-375g-1024x683.png
ALGA_Gray_Green-Spools-375g-1024x683.png
ALGA_Diatomic_Green-Spools-375g-1024x683.png
ALGA_Green_Green-Spools-375g-1024x683-3.png
ALGA_Black_Green-Spools-375g-1024x683.png
ALGA_Tan_Green-Spools-375g-1024x683.png
ALGA-Coils-600x600.png
ALGA-Spools-600x600-2.png
ALGIX 3D_ ALGA™2.jpg

ALGA™ Algae Based PLA

from 12.99

Algix 3D has chosen 3D Printlife to be the sole manufacturer of their unique and sustainable filaments.  We are thrilled to integrate their line of high performance, sustainable materials into our portfolio as we work together to improve sustainability in 3d printing.

ALGA™ filament is 100% biodegradable and is the perfect material for prototyping, educational and design or artistic projects inspired by nature. ALGA™ filament is made from nuisance algae, thus helping keep ecology in balance through remediation. The remainder of the filament is made from PLA, a nontoxic resin made of lactic acid derived from plant sugars. ALGA™ filament has a unique texture and color palette inspired by nature. Using ALGA™ filament for your prints allows you to use a more sustainable material to print your dreams.

    Diameter:
    Color:
    Quantity:
    Add To Cart

    3D Printing Tips

    • This filament will run best at an extrusion temperature of 195°C - 210°C (2.85mm filament usually prints at the higher end of this range)
    • Be sure your build plate is level, clean and oil-free before printing. ALGA™ filament adheres well to glass or plastic and does not require a heated build plate.
    • If your printer does have a heated build plate, we do advise using it for larger prints set at a temperature of 50°C, and if your machine has a fan, we recommend using it for most prints.

    Premium Quality PLA Filament

    Dimensional Accuracy < +/- 0.03mm

    Nozzle Temp 195-210°C (2.85mm filament usually prints at the higher end of this range)

    Every Spool Plants a Tree

    100% Biodegradable

    Made in the USA